| Supply voltage | 400 V / 460 V |
|---|---|
| Power consumption (depending on the equipment) | 15 A – 32 A |
| Space requirement / length x width | 2.4 m x 5.4 m |
| Total weight | 12 500 kg |
| Adjustment range X, Y | 550 x 300 mm |
|---|---|
| Vertical adjustment of the grinding head (W) | 450 mm |
| Passage between table surface and U-axis grinding motor support plate | 745 mm |
| Passage between table surface and (70HS) grinding motor nose tool holder | 0 – 550 mm |
| Grinding motor 70HS in U-axis centre position, in automatic mode | 144 mm |
|---|---|
| With cantilever plates | 360 mm |
| 40HS grinding motor in U-axis centre position, in automatic mode | 194 mm |
|---|---|
| 40HS grinding motor in U-axis offset position, in semi-automatic mode | 360 mm |
| Conical grinding, included angle, divergent or convergent (option) | 120 degree |
| Usable area | 650 x 400 mm |
|---|---|
| T-slots, width | 8, 10 mm |
| Permissible load | 300 kg |
| Adjustment speed | 8 000 mm/min |
|---|---|
| Processing speed | 0 – 4 000 mm/min |
| Z-stroke movement, infinitely adjustable | V min. 0.5 mm/min / V max. 26 000 mm/min |
|---|---|
| Z-stroke frequency | Max. 10 Hz |
| Z-stroke length, infinitely adjustable | 0.1 – 170 mm |
| U-axis, radial infeed range in motorised CNC operation | from -3 to +47 mm |
| Diameter of the spindle sleeve | 125 mm |
|---|
| Electric grinding motor 40HS, infinitely adjustable and programmable | 3 600 – 45 000 min-1 |
|---|---|
| Electric grinding motor 70HS, infinitely adjustable and programmable | 8 000 – 70 000 min-1 |
| Device for air-driven grinding turbine T15 | up to 150 000 min-1 |
| Planetary speed, infinitely adjustable and programmable | 1 – 350 min-1 |
|---|---|
| Tracking mode, AC servo drive | up to 10 min-1 |
| Manufacturer / Type | FANUC 30i-B |
|---|---|
| Display | 15 inch touch display |
| HMI | WHITE Solution |
|---|
Kontakta oss idag så hjälper vi dig ta fram rätt lösning. Med lång erfarenhet och gedigen kunskap är vi säkra på kunna hitta rätt maskin för just din verksamhet
