| X/Y/Z travel | 720 / 410 / 430 mm |
|---|---|
| Spindle nose to table | 150 – 580 mm |
| Distance from table to main door | 150 mm |
| Spindle center to column | 429 mm |
| Length × width | 800 × 400 mm |
|---|---|
| Max. load capacity | 300 kg |
| T-slot (size × qty × spacing) | 14 mm × 3 × 125 mm |
| Taper ISO No. | BBT40 |
|---|---|
| Max. speed | 12 000 rpm |
| Power (Fanuc / Siemens) | 7.5 kW (optional 11 kW) / 13.2 kW |
| Torque (Fanuc / Siemens) | 47.8 Nm (optional 70 Nm) / 63 Nm |
| Rapid traverse rate (X/Y/Z) | 36 / 36 / 36 m/min |
|---|---|
| Max. feed rate | 12 m/min |
| Servo motor (X/Y/Z), Fanuc / Siemens | 1.8 / 1.8 / 1.8 kW / 2.85 / 2.85 / 2.85 kW |
| Tool capacity | 20 (mechanical arm) |
|---|---|
| Method of tool selection | Bi-directional |
| Max. tool diameter (full drum) | 80 mm |
| Max. tool diameter (adj. pockets empty) | 150 mm |
| Max. tool length | 260 mm |
| Max. tool weight | 7 kg |
| Tool change time | T–T 1.7 s / C–C 3.2 s |
| Positioning accuracy (full stroke) | 0.008 mm |
|---|---|
| Repeatability (full stroke) | 0.004 mm |
| Coolant capacity | 250 L |
|---|---|
| Coolant flow | 40 L/min |
| Compressed air | 5 – 7 bar, 600 L/min |
| Power requirement (Fanuc / Siemens) | 20 kW / 25 kW |
| Weight | 2930 kg |
| X/Y/Z axis travel | 1020 / 610 / 650 mm |
|---|---|
| Spindle nose to table | 150 – 800 mm |
| Spindle center to column | 658 mm |
| Length × width | 1200 × 550 mm |
|---|---|
| Max. load capacity | 900 kg |
| T-slot (size × qty × spacing) | 18 mm × 5 × 100 mm |
| Taper ISO No. | BBT40 |
|---|---|
| Max. speed | 12 000 rpm |
| Power (Fanuc / Siemens) | 18.5 kW / 18.8 kW |
| Torque (Fanuc / Siemens) | 118 Nm / 119 Nm |
| Taper ISO No. | BBT50 |
|---|---|
| Max. speed | 6000 rpm |
| Power (Fanuc / Siemens) | 18.5 kW / 22.6 kW |
| Torque (Fanuc / Siemens) | 302 Nm / 278 Nm |
| Ball screw size | 40 mm |
|---|---|
| Ball screw pitch (X/Y/Z) | 16 / 16 / 12 mm |
| Rapid traverse rate (X/Y/Z), BT40 / BT50 | 48 / 48 / 36 m/min / 36 / 36 / 24 m/min |
| Max. feed rate | 15 m/min |
| Tool capacity | 24 |
|---|---|
| Method of tool selection | Bi-directional |
| Max. tool diameter (full drum) | 80 mm |
| Max. tool diameter (adj. pockets empty) | 150 mm |
| Max. tool length | 300 mm |
| Max. tool weight | 8 kg |
| Tool change time | T–T 1.5 s |
| Tool capacity | 24 |
|---|---|
| Method of tool selection | Bi-directional |
| Max. tool diameter (full drum) | 105 mm |
| Max. tool diameter (adj. pockets empty) | 200 mm |
| Max. tool length | 350 mm |
| Max. tool weight | 15 kg |
| Tool change time | T–T 3.5 s |
| Positioning X, Y, Z | 0.006 / 0.006 / 0.006 mm |
|---|---|
| Repeatability X, Y, Z | 0.003 / 0.003 / 0.004 mm |
| Coolant capacity | 260 L |
|---|---|
| Coolant flow | 40 L/min |
| Compressed air | 6 – 8 bar, 600 L/min |
| Weight (BT40 / BT50) | 5500 kg / 6000 kg |
| Machine dimensions (L × W × H, with chip conveyor) | 3410 × 2581 × 3004 mm |
| Length × width (M8 1300 / M8 1600) | 1425 × 700 mm / 1700 × 700 mm |
|---|---|
| Max. load capacity | 1500 kg |
| Spindle motor power | 18.5 kW |
|---|---|
| Standard spindle | BT50, 6000 rpm |
| Optional spindle | BT40, 12 000 rpm direct drive |
| Optional two-speed gearbox | 2000 / 6000 rpm |
| Rapid traverse rate (X, Y) | 36 m/min |
| Max. cutting feed rate | 12 m/min |
| Tool changer type | Swing arm |
|---|---|
| Tool capacity | 24 (standard) / 32 (optional) |
| Method of tool selection | Bi-directional |
| Max. tool diameter (full drum) | 105 mm (standard 24) / 125 mm (optional 32) |
| Max. tool diameter (adj. pockets empty) | 200 mm (standard 24) / 229 mm (optional 32) |
| Tool change time | 3.5 s |
| Tool changer type | Swing arm |
|---|---|
| Method of tool selection | Bi-directional |
| Max. tool diameter (full drum) | 76 mm |
| Max. tool diameter (adj. pockets empty) | 150 mm |
| Max. tool length | 300 mm |
| Max. tool weight | 8 kg |
| Tool change time | 2.5 s |
| Positioning (full travel) | 0.012 mm |
|---|---|
| Repositioning (full travel) | 0.006 mm |
| Lubrication system | Automatic centralized grease lubrication, 0.7 L |
|---|---|
| Coolant capacity (M8 1300 / M8 1600) | 400 L / 500 L |
| Standard cooling pressure | 2.8 bar |
| Standard cooling flow | 50 L/min |
| Washing water flow | 114 L/min |
| Min. compressed air | 5 bar |
| Power supply | 3 phase 380 V, 35 kVA |
| Machine size (M8 1300 / M8 1600) | 3298 × 2754 × 2878 mm / 3898 × 2754 × 2878 mm |
| Net weight (M8 1300 / M8 1600) | 9800 kg / 10 300 kg |
| Manufacturer / Type | Fanuc 0i MF Plus / Siemens 828D |
|---|---|
| Display | 10.4″ color display |
| Max. controlled axes (Fanuc) | 5 (4 simultaneous) |
| Programming resolution (Fanuc) | 0.001 mm |
| Tool management (Siemens 828D) | 256 tools, with tool life monitoring |
Kontakta oss idag så hjälper vi dig ta fram rätt lösning. Med lång erfarenhet och gedigen kunskap är vi säkra på kunna hitta rätt maskin för just din verksamhet
